Wish List

Saturday, October 17, 2020

More In Love Art Shop products...


 This is another card using some fun In Love Art Shop products. First, I laid this stencil over the white panel and blended on three different colors of ink. 

I used this die set to cut the word "thankful" and its vellum shadow.

Both the word die and the stencil can be purchased at In Love Art Shop using this discount code: G-26257

I found a stamp in my stash that said "for you" and created a little sentiment strip to add with foam tape below my main sentiment word.

Because I have a hard time leaving well enough alone, I added some clear Nuvo drops to the little circles in my stencil design. They added some nice texture and didn't detract from the overall simplicity of my card, so I actually rather liked them when they were done.

The inside of my card was left blank. I only added a narrow left-over strip of my stenciled background. 

If the weather cooperates (we actually had snow flurries yesterday!), I have decided to plant some tulip bulbs today. I'm excited about having something special to look forward to in the spring. I love tulips and have planted them before, but they have always died out on me after one season of blossoms. Not long ago I received dozens of tulip bulbs from Holland as a belated birthday gift from my stepdaughter and her family, so I really hope these bulbs take hold and produce flowers for at least a few years. 

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Monday, October 12, 2020

Witch silhouette for Halloween...

 


For this card I used this stamp set from the In Love Art Shop (Discount code: G-26257). I began with an off-white panel with a circle mask on the center upper half. With my mask in place, I used my blending brushes to apply some ink until I had a spooky night sky.

Once my ink blending was done and the ink had thoroughly dried, I stamped my witch and bats with Versafine black ink. I like this ink for solid images because it gives such great coverage. I also blended some black ink onto the bottom of my panel.

The jack-o-lantern was stamped onto some orange CS. I added glitter pen to the eyes, nose and mouth for some sparkle. I attached my pumpkin to my sentiment strip, which was popped up on foam squares.















The inside of my card was stamped with a verse and a couple more bats. I think this is one of the quickest Halloween cards I have ever made! It was so easy to pull together. This would definitely be a great stamp set (Discount code: G-26257) to add to your Halloween card-making supplies. Because I love making Halloween cards, I try to get at least one new stamp set each year.

We've had such beautiful weather for the last week or so, but I think it's all going to change very soon. I had to turn the heat on tonight as it is getting quite chilly out. I am NOT looking forward to snowbanks!

Thank you for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl


Friday, October 9, 2020

Gorgeous autumn leaves from In Love Art Shop...

 I received a wonderful stamp set from In Love Art Shop (Discount code: G-26257) that I had to use immediately, because I had some techniques in mind that I wanted to try.


Just look at those lovely leaves! To achieve the different colors in them, I first blended some fall ink colors randomly onto an off-white piece of cardstock. Once the ink had thoroughly dried, I cut the piece to size, stamped my leaves with Versamark ink and sprinkled them with clear embossing powder, which was then heat set.

After that was done, I sponged on some dark brown ink, which the embossed images resisted. The clear embossing powder allowed the colors to shine through.

The design on each leaf includes a little round circle, which was the perfect place to glue a sequin for just a little sparkle.
















On the inside of my card, I added a computer-generated sentiment and a small leaf punched from some of the original ink-blended paper I had made.

I loved how this card turned out, but I wanted to try something else with this stamp set, which I've shared with you below.















For this card, I took some of my ink-blended cardstock, stamped my leaves with Versamark once again, but this time I sprinkled them with gold embossing powder and heat set it.


I fussy-cut each leaf (they're pretty simple to cut out) and added them to an embossed dark brown background. Finally, I added a gold die-cut word and a few sequins.



For this card I added one of the leaves to a banner and put a little coordinating bow on the stem. The same die-cut word was also glued to my banner.

Aren't those leaves pretty! This stamp set was so much fun to play with. You can find it here on the In Love Art Shop site.  Discount code: G-26257








We're at peak leaf-viewing in Minneapolis right now. This is a picture that was taken by my step-son Bryan Winget. He's a wonderful photographer, and he snapped this photo of one of the streets in the Minneapolis/St. Paul area. 

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl


Monday, October 5, 2020

Let's Craft and Create Challenge #164: Paper strips instead of ribbon...

Can you believe our summer is over and Autumn is here in earnest? We are quickly approaching peak leaf colors here in Minnesota. The trees are truly beautiful! 

But the beginning of a new month also means there's a new challenge at Let's Craft and Create. This month's challenge is to create a card using paper strips instead of ribbon. Remember when we used to use a LOT of ribbon on our cards? I sure do, which is why I have two boxes of assorted ribbons!

Here's the card I came up with:

I die-cut three pumpkins and inked around their edges. I also die-cut the word BOO out of black glitter cardstock and added one letter to each of the pumpkins. 

I spaced my pumpkins evenly down the left side of my card front and popped them up on foam squares. Then I added my strips of orange dotty paper which had been fishtailed on one end.

My final step was to add some die-cut bats. I just love the hanging ones and couldn't resist putting one on the front and one inside.

Here is a little better look at my pumpkins and the glittery letters on them.











Here's a peek at the inside where you can see my  stamped sentiment and two more die-cut bats.

I don't know if you've noticed, but I used a white gel pen to dot their eyes, just to give them a little character.

Now I hope you'll take a stab (had to throw in that creepy Halloween term) at making a card using strips of cardstock or DSP instead of ribbon. The Design Team has lots of inspiration for you at Let's Craft and Create. And don't forget about the prize for our winner! There's always a prize at LC&C, which makes the challenge even more fun.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl


Friday, October 2, 2020

Pretty in purple...

 This card is sooooooo simple, but I actually really like it.

After adding my DSP to the front of my card, I punched a couple of holes (they were actually small slots) in preparation for adding a faux bow.

Once that was done, I die-cut a wildflower, a pussy willow twig and a leafy twig. I added them to my card front along with a heat-embossed sentiment. Then, I created my faux bow, and my card front was done.

I also put my DSP on the inside of my card, along with a wonky-stitched rectangle and a get well sentiment.

So simple, so quick, but I love the way it turned out.

Today I received some tulip bulbs from Holland. My stepdaughter in Germany sent them to me as a belated birthday present. They are a variety of types and colors, and I can't wait to get them planted and see them bloom next spring. I don't have the best of luck with tulips--they tend to only last a couple of years--but I really enjoy them anyway.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl


Tuesday, September 29, 2020

Quick Christmas card...


 This card was so quick to make, but I think it turned out really pretty, too. I dry-embossed the bottom of my front panel, added a die-cut snowflake wreath and sentiment to the top, and finished it off with a bit of gold ribbon.  The snowflake wreath was cut from glitter CS that has a little gold sparkle in it.


Here's a little closer look at the wreath and sentiment. In looking at this photo, I feel like I could have added a few gold gems to the wreath. What do you think? Yay or nay?








On the inside of my card I heat embossed a stamped sentiment. And because I had cut a larger snowflake out of the same glitter CS, I decided to use it here. I glued a portion of it on the top edge of my panel, trimmed it down and put the cut-off portion on the left side of my panel. I think it dressed up the inside quite nicely!

We had a busy day today, driving our RV across the entire metro area to a shop where we had the generator fixed. When it was ready we drove across the metro area again, picked it up, drove it to the opposite end of the metro area where we store it for the winter and then drove home. I think we spent at least 4 hours on the road!!

I also managed to get a fun project started. I had decided to have a t-shirt quilt made out of all the t-shirts I had collected while working for Habitat for Humanity. I knew I would never wear so many t-shirts, but they were still meaningful to me. Anyway, I found a company (Project Repat) that makes t-shirt quilts. My part of the project was to cut all the t-shirts into two halves--front and back--and then box up all the halves I wanted included on my quilt. I needed 30 shirt halves plus a few extras in case they were needed. Project Repat will cut the quilt squares from the shirt halves that I have mailed to them. They will make me a quilt big enough to use on a full-size bed. I'm excited that I'll have a fun and usable quilt that will remind me of how much I loved my work with Habitat.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Friday, September 25, 2020

Coloring in a black and white image...

 I have had some card bases with black and white images on their fronts for...well...years! When I went through my card bases, looking for some inspiration, I found this one and decided to color it up, cut the front off and add it to a blue card base.

This card front featured the script background and the flowers. No color, no dimension. Just a very plain, black and white design. I decided to jazz it up a bit, so I grabbed some alcohol markers and went to work. I also stamped a simple sentiment in the open space above the flowers.


I also used some Nuvo Drops on the berry clusters.




It was fun choosing the colors for the flowers and  bringing them to life. 





I decided to make this a get well card and added the appropriate stamped sentiment on the inside. So many people are ill these days, and I felt that a get well card would be a welcome addition to the cards I sell at the thrift store.

We had my daughter and her family over for dinner tonight. It is such a treat to have them join us for a meal. It just doesn't happen as much as we would like these days. The grandkids are growing up so fast, and the Coronavirus is keeping us from participating in their lives as much as we would like.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl