Sending a smile...

Sending smiles is so important these days, so I decided to make a card that would do just that.

I'm sure you recognize one of Tim Holtz's crazy birds, which I have colored with alcohol markers and then cut out with the matching die.

My bird was popped up on foam tape as was my computer-generated sentiment.

I had cut out my sentiment strips and backed them with black cardstock before popping them up on my card.

The border die across the bottom of my DSP (from Stampin' Up) is an unbranded one that is fun to use on cards like this.





I left my card blank so that I can write a personal note inside. In fact, this card has already been sent, and I'm pretty certain it resulted in some smiles!

Today the sun is shining brightly and the weather has warmed just a tad. We've been promised a very nice weekend, so it's time to get serious about that outdoor work. If I were a betting woman, I'd be putting nearly all my money on "NO MORE SNOW!"

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day. Happy weekend, everyone!
Cheryl

Sympathy cards in silver and white...

I had some handmade, silver-dotted paper in my stash for at least 10 years, so it was time to use it on some cards. I know the paper looks rather fibrous in these photos, but that's the nature of it.

I started with a silver card base and added my panel of handmade paper.

I had an ornate oval in my die collection, so I used it as the focal point of my card.

This one has a few stems of holly hocks with silver centers made using a Viva Decor pen.

The sentiment on each card was heat embossed with Wow! embossing powder.

I added a silver heat-embossed sentiment on the inside of each card. If you look closely, you'll see that there's a tiny bit of dry-embossing on the bottom of the panel, as well.

These cards were difficult to photograph. The day was dark and dreary and the muted colors didn't help.





Sadly, I've already had to use one of these cards, so I'll be making more for my stash in the near future.

Our 5-6" of snow from Easter Sunday is nearly gone already--melted by the strength of the April sun. I'm hoping now that warm weather will move in for good.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl

Happy Easter and Blessed Passover to all those celebrating...

I'm thinking of all of you today who, like us, are celebrating alone. It is difficult not to have our families around when that has been the tradition all our lives. I am especially thinking of my Aunt today, as my Uncle passed away on March 25, and this will be her first holiday without him by her side. I made the card above with her in mind, using a hexagon die set.

The crocuses were stamped with a pale water-based ink onto water color paper. I then got out my water colors and painted them, using only one shade of purple, two shades of green and a golden orange for the stamens.

I used some matching dies to cut them out before adhering them to my card.

The white center hexagon has been popped up with foam tape.

Because I had a couple of leftover crocuses after finishing my card front, I decided to adhere one of them on the inside of my card.

I hope you all have a lovely celebration today. We are actually in the middle of a spring snowstorm! It is snowing like crazy outside as I type this.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl






Edited to add: 

Here's what it looks like outside our front door. Not exactly the usual Easter scene!

Here's my hubby and I enjoying our Easter dinner.

We wish many blessings to all of you!

Pretty in pink Easter cards...

Sometimes simple is best, and these two cards were definitely simple.

All it took for this card was a pretty tulip die-cut, a heat-embossed sentiment and a few flat-backed pearls.

This photo shows the sentiment and the pearls a little better.

It was a dreary day when I took these photos, so they really don't show the card in its best light.


 

I heat-embossed the sentiment on the inside, as well, and rounded the upper right-hand corner of my card. I thought it needed a softer line to reflect the soft lines of the tulips.

This second card used a die that created a tulip border around the edge.  I simply inserted a pink piece of paper that would show through the die-cut design.

To finish off the card, I added some die-cut vellum butterflies (with pink pearl centers) a few pink sequins and some pink and white baker's twine tied in a bow.

I used the same sentiment on the interior of this card and stamped it in pink.















In my last post I mentioned that I thought I needed to trim my own hair. It was beginning to drive me a bit crazy every morning when I tried to blow-dry it.  Well I took a scissor to my bangs and to the back of my hair--particularly at the nape of my neck. I did this pretty much by "feel," as I did not have a mirror that I could hold and still cut my hair at the same time. It actually didn't turn out too badly. I took a photo of the back of my head in a mirror to show you the result.

The photo is a bit blurry, but at least you can see that there aren't any big gouges in my hair across the bottom. I even took a disposable razor and shaved the nape of my neck.

I guess this just shows we can do what we have to and not fail completely!

Thanks so much for stopping by and remember to laugh--a little or a lot--every day.
Cheryl

Quick Easter cards for the grands...

I have 10 grandchildren, so I needed some quick-to-make Easter cards for them, and here is what I came up with:

I started with some pre-made card blanks that I've had for years. These particular blanks had a circle aperture at the top.

I remember I had this swirly twig wreath die, and it was the perfect size! I cut it out of green cardstock and added some Nuvo Drops in Easter colors.

Finally, I die-cut three simple bunnies, inked their edges and added some enamel dots for tails.

I really didn't have to do anything additional on the inside since I had already stamped "Happy Easter" through the aperture.

Each of my five grandsons is receiving one of these cards with a little something tucked inside.

For my granddaughters, I once again chose some pre-made card blanks and then used glitter cardstock to die-cut some cute "bunnies peeking through windows." I used the same dies to cut the apertures in my DSP panels so that the bunny die-cuts fit perfectly.

The little tags were cut, inked, stamped and popped up on foam squares.

The final decoration was a few Nuvo Drops in coordinating colors.



On the inside of these cards I wrote a personal note and added a little something to let them know I was thinking of them.

This is the first time I've used these bunny dies, so I'm linking this card to the NBUS Challenge blog, deftly led by NBUS Queen Darnell from djkardkreations. Be sure to visit this new blog site to see what the NBUS excitement is all about and for lots of incredibly inspiring entries.

I made all of these cards in an afternoon--which tells you how easy they were. I think they turned out rather cute and festive, though.

The other day I read something online that made me laugh: If you think purchasing an adequate amount of toilet paper is difficult, wait until we're all trying to book haircut appointments!

I'm past due for a haircut and seriously thinking of getting out the scissors and giving it a go myself! If it turns out horribly, at least I won't have to go anywhere that people might see it. And it seems we'll be confined at home long enough for it to grow out.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl

Let's Craft and Create Challenge #158: Through a window...

It's time once again for our monthly challenge over at Let's Craft and Create. This month the challenge is to make a card based on our theme "through a window," but keep in mind, we always have a standing "anything goes" option.

I have just one window die, which I haven't used much at all, so it was time to get it out, dust it off and do a little die-cutting. This is what I came up with.

I wanted my card to have the look and feel of a seaside cottage with weathered wood and frilly curtains. And what would a seaside cottage be without its resident cat?

The first thing I did was to create my weathered wood by stamping a gray CS panel using a woodgrain stamp and gray ink. I thought it turned out rather realistic-looking.

I created my window scene with some distress inks and a brush applicator. The seagulls were die-cut, as was the cat. I pulled dies from five different sets for this card! I also used a Martha Stewart punch for my window valance.

I thought my stamped sentiment was appropriate for this particular time in history when we're all social-distancing and staying home as much as possible.

 There actually is a die-cut curtain rod that my valance has been folded over at the top of my window. Even though it's not really visible, I feel like it added the tiniest bit of detail to my scene.

I did a bit of inking on my window frame and sill with some gray ink. They wouldn't have been stark white in a weathered seaside cottage, would they?

Once when we drove around Cape Cod, I picked out my favorite seaside cottage. It had weathered wood shakes for siding on the outside and purple flowers in boxes under each window. I imagined that there was weathered wood paneling on the inside (which I never saw, of course) and a cat lounging in the sunshine that streamed in from one of the windows.


I hope you'll check out the rest of the Design Team's projects and join in on our latest challenge over on Let's Craft and Create. As always, there is a prize up for grabs.

Thank you so much for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl

Simple Easter bunny cards...

As I have mentioned before, I make a lot of cards that are sold at a local thrift store to help them raise money for their community outreach programs. Here are some of them that I made this year:

This little bunny is so cute. It's a really easy die set (unbranded) to put together. I added the little oval "rug" to ground him. The sentiment was cut from some foam board for dimension.

I used ProMarkers to color the pink on his ears and paws and the black on his buttons. I also added a little glitter pen to his buttons for a bit of sparkle.

For this card I used a felt bunny sticker that I had left over from last year. I see in this photo that the tail on this sticker isn't in quite the right place, but this one is already at the thrift store so I'm not able to fix that. I'm always amazed at what I see in photos that I don't notice IRL!

The scalloped border and sentiment were both cut from dies. The sentiment was cut out of both CS and foam board, which were glued together.

I have a bunny border die with a row of bunnies "hanging over the edge." I had used part of the border and had a couple of the bunnies left over, so I cut away one of them and put him on my sentiment panel. I think he looks so cute hanging there. The enamel dots are Nuvo Drops. They didn't turn out perfectly round (user error!), but I think that's ok. They're more in the shape of eggs, right?

Once again, I cut my sentiment from foam board. Since the foam board is stiff, it makes the sentiments so much easier to handle and glue down. They don't become misshapen the way they can if you cut them out of a regular foam sheet.

For the interiors of these cards, I either stamped an Easter sentiment or printed one from my computer.









I've already mailed the Easter cards that I regularly send to family in Europe, and today I will try to get the rest addressed and ready to mail to family here in the U.S. It will definitely be a strange Easter this year with no church service and no guests for Easter dinner. I haven't even bothered to get out my few Easter decorations that I usually display. How about you? Have you decorated your home for Easter?

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.
Cheryl