Wish List

Friday, November 20, 2026

Thanksgiving cards in both nontraditional and traditional colors...

 

I had an image of jewel-toned leaves on my computer that I decided I just had to use. I don't know how long I've had it or where I got it, but I'm sure it came from some generous soul who created it and offered it online as free for anyone to use. I printed it out with my computer and set to work...er...play.

I cut a 3 3/4" X 5" panel of the leaf print and matted it with a 4" X 5 1/4" panel of white cardstock. These were then adhered to a deep reddish purple cardbase.


I die-cut a scalloped modern oval, stamped it with a sentiment and added a dimensional leaf sticker that contained at least a few spots of those beautiful jewel tones.

The oval was popped up with foam tape and centered on the card front.







I printed a sentiment for the inside and added another smaller dimensional sticker.









I know I've shared a card with this "swirl of leaves" die-cut before, but I wanted to show you what it looked like when it was used with a light (off-white, actually) piece of cardstock. I didn't do any inking this time. The colored paper that shows through the leaf apertures is actually a piece of DSP I found in my stash, so I didn't even have to do any ink blending to get those pretty fall shades!


I die-cut the word "thankful" from some deep orange cardstock and glued it directly to the card front.

I wanted to add a couple of enamel dots, but I didn't have the right color. I didn't have Nuvo drops in the right shade either, so I used an alcohol marker to color two peach-colored enamel dots that were in my stash.


I used the swirl die to cut a couple of extra leaves to embellish the stamped sentiment on the inside of the card.

I love making cards out of nontraditional colors from time to time. I think it adds to the uniqueness of the card and is hopefully a pleasant surprise for the recipient.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Wednesday, November 18, 2026

Simple card design for Thanksgiving...

 

The construction of this card began with a dark brown A2 card base. I cut a 4" X 5 1/4" panel of off-white cardstock and then the same size layer of double-sided DSP.

I cut into the center of the DSP on the right side (about 1 1/2", I think) and folded the upper and lower portions as shown in the photo above. This panel was then adhered directly on top of the off-white piece.


I added some double-sided foam tape under each flap to hold them in place. Then I stamped a sentiment and added a collection of leaves and sprigs.

As a final embellishment, I tied some linen thread into a bow and adhered it with a glue dot.








I stamped a sentiment on the inside to finish the card.

This design could easily be used for any occasion. A flower, an image or almost anything you wish could be added as a focal point, instead of the leaves and sprigs that I used. You could even use a decorative circle or other shape, stamped with a sentiment.

I used plain cardstock beneath my DSP, but a coordinating piece of DSP would be pretty, too. I may try this layout for a few Christmas cards. I have so much Christmas paper, and I need to put more of it to good use! I think a cluster of holly and berries would make a great focal point on those.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Monday, November 16, 2026

Triangle fold card...

 

I made a couple of triangle fold cards for Thanksgiving and this was one of them. 

I started by scoring an 8 1/2" X 11" sheet of cardstock (for the base card) down the center of the 11" length and across the center of the 81/2"width. That is to say, score it at 4 1/4" lengthwise and 5 1/2" widthwise. Then you cut this sheet from the top left corner down through the center to the bottom right corner. This gives you two card bases.

Click here if you would like to watch a video that will make these directions much clearer. 


After I cut some DSP (3 7/8" X 5", cut diagonally) for the two triangular flaps and glued it on, I die-cut two rectangles and adhered them together for strength. The left side of the rectangle was glued to the top flap.

To the rectangle, I added a squash that had been fussy-cut from some DSP, a die-cut "Happy Thanksgiving" and a couple of enamel dots. 







This is how the card looks when it is opened up. I probably should have used kraft cardstock for the strengthening layer of the rectangle, but I was trying to use up some scraps.

I wish I was a fly on the wall when the recipient gets this card. I'd like to know if they find it interesting or just weird! Regardless, it was fun to make.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl


Friday, November 13, 2026

Using some scraps for a Thanksgiving card...

 

You may have seen each of the DSP patterns on the card above on other cards I've made. I ended up with a lot of scraps after finishing the cards for my personal use, so I tried to use as many as I could on cards to donate.

I cut a dark green piece of cardstock at 4" X 5 1/4". Then I grabbed some scraps I thought would work and simply cut them to fit onto the green piece as you see above. I didn't follow any specific measurements. I just trimmed the pieces until I had what I wanted.

The dark green circle was from a cardstock sticker sheet. I added another stamped and die-cut circle on top of it. To finish my focal piece, I added a couple of die-cut pumpkins and some gems. Only the smallest pumpkin is popped up with foam tape.


I had a third pumpkin, so I added it to the inside, along with a stamped sentiment.

This was a quick card to pull together. It not only used up some scraps, but also the pumpkin die-cuts that I had in my stash.

I checked yesterday on the Thanksgiving cards I had taken to the thrift store, and they had all sold. I was a bit surprised, but pleased about that. I'll make a few more to take next week--and maybe use up a few more scraps!

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Wednesday, November 11, 2026

A swirl of leaves for Thanksgiving...

 

A new die for me this year was one that cut a swirl of leaves across a card front, so I'm entering this card into Darnell's current NBUS (Never Before Used Schtuff) challenge.

I began the construction of this card by cutting a 5 3/8" X 4 1/8"panel of kraft cardstock. Once it was cut, I used a blending brush to add some brown ink around the leaf-shaped openings.

Before adding the die-cut panel to the card front, I selected four different colors of ink in fall colors and used some blending brushes to add them in a random way to an entire sheet of heavy copy paper. When the entire sheet was covered, I cut it into 4" X 5 1/4" pieces to fit behind my leaf swirl panels.

First I adhered an inkblended panel to the card front and then I glued the die-cut panel on top of that.


Finally, I added a metallic gold die-cut "thankful" and some gems for sparkle.

I created and then printed a sentiment for the inside. After adding some ink to a few of the leaves left over from die-cutting the front, I glued them around the sentiment.

I am still working on more Thanksgiving cards to donate to the thrift store. They actually seem to be selling pretty well, so I need to keep replenishing the supply.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Monday, November 9, 2026

Easy cards with added interest...

 

These cards were made very quickly, and I think they look a lot more difficult to make than they actually are.


I started with a piece of cardstock that was 4 1/4" X 11", scored at 5 1/2" to create a top-folding card base. I cut 3" off the bottom of the card front and used this piece to die-cut a flap, using the largest die that still fit within the borders of the cut-off piece. Once that piece was die-cut, I set it aside to work on the rest of the card base.`


I added a 2 1/4" X 4" piece of DSP to the now-shorter front section of the card base. I added a piece of white cardstock (4" X 5 1/4") to the inside of the card and then added a 1" strip of the DSP at the bottom of it.

Once the base of the card was done, I turned my attention back to the flap. 

I die-cut a white piece of CS with the next smaller size die and adhered it to the die-cut flap. Then I die-cut a tree and glued that towards the top. If you look closely, you'll see that I used a marker to create a bit of "ground" for the tree to sit on.

The sentiment was stamped, matted and popped up with foam tape just beneath the tree.

The flap was adhered to the top of the card base, centering it on the card front as best I could. I used a strong, one-inch wide double-sided tape for this, so it was the perfect width and didn't result in any stickiness where it shouldn't be!



Pictured at right is the sentiment I stamped on the inside of both cards.

I was able to make both of these cards in about 30 minutes. That's quick for me, so I was really pleased. I think I may try making a few Christmas cards using this design, since it would easily lend itself to mass production.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Saturday, November 7, 2026

Countdown to Thanksgiving...

I've been busy this week planning for our big Thanksgiving meal--even getting started on stocking up on the groceries I'll need--and making some Thanksgiving cards for personal use and to donate.

I made a couple of cards like this one, using scraps of DSP that were in Autumn colors.

The great thing about this card design, is that the four small rectangles of DSP are all the same size. That makes it easy to cut them out and add them to the card fronts.

I started by cutting a brown mat slightly smaller (in length and width) than 4" X 5 1/4".  Then I cut a panel of each DSP pattern at 1/4" less than the brown one in both length and width. 

I cut the two DSP panels in half in both directions left me which resulted in four small rectangles of each pattern. I adhered two of each pattern to the brown panel as you see in the photo.


I cut two arched rectangles for my focal point--one in brown and one in off-white. I stamped a sentiment on the off-white one and adhered it to the brown one.

After gluing these to the card front, I added a dimensional leaf sticker. The sticker had a bit of sparkle on it, but of course it doesn't show in the photo.







Before making this card, I had used my computer to print out some Thanksgiving sentiments, so I used one of them on the inside of this card.

Because I had four more of those small DSP rectangles, I made a second card just like this one.

I took my first batch of Thanksgiving cards to the thrift store last Thursday. I don't think a lot of people send them out, so it will be interesting to see if they all sell.

Thanks so much for stopping by, and remember to laugh--a little or a lot--everyday.

Cheryl

Thursday, November 5, 2026

Let's Craft and Create Challenge #237: Anything Goes or Use a Sketch...


All of us at Let's Craft and Create want to help jumpstart your creativity, and one way to do that is to encourage you to use a card sketch. 

I keep a little soft-cover photo book filled with card sketches.  When I find one online that I want to use, I copy the image, size it to about 4" X 6", print it and cut it out, then add it to my photo book. That way, it's easy to flip through all of them and choose one that inspires me.

Here's the sketch I used for today's post:


Instead of making just one card with this sketch, I decided to make three of them, with some tweaks to the sketch for each card.

Sketches are only suggestions, so we can feel free to change the measurements used or even the layout.



Can you see the basic layout of the sketch in each of these cards? It was fun to actually try to mix it up a bit, but keep the core design intact.

This card featured a die-cut flower that shared some features with the flowers in the DSP. The small rectangle was popped up with foam tape and the sentiment strip, which was glued directly on top of the flower, was quite a lot shorter than the one in the sketch.

I also added a thin black strip where the two pieces of DSP meet.


I stamped a sentiment on the inside and added a strip of the red cardstock used for the small rectangle.










For this card, I used a larger, matted rectangle as a focal point, popping it up with foam tape. The sentiment strip was placed at the top of the rectangle, rather than towards the bottom.


I stamped a sentiment and a few decorative flowers on the inside.










My final card was a Thanksgiving card in non-traditional colors. This time I used a couple of arched rectangle dies for my focal point. After cutting the white arched rectangle, I dry-embossed it with a leaf-patterned folder and then lightly inked the embossing with some aqua ink and a finger dauber.

The matted, arched rectangle was popped up with foam tape, and the pumpkin, leafy sprig and sentiment banner were glued directly to it.


I stamped a sentiment on the inside and embellished the panel with another die-cut and lightly inked pumpkin and leafy sprig.

The other members of the Design Team have also used sketches to inspire you, so I hope you'll take a peek at all their creations here.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Monday, November 2, 2026

To the perfect pair...

 

I saw a card like this somewhere online and decided I had to give it a try. I created a top-folding A2 cardbase with blue cardstock. I added a panel of DSP that was 1/4" smaller in length and width. Then I selected a square die and cut an aperture through both layers in the card front.


I added a pale yellow/green panel to the inside of the card. This color, along with the blue, were drawn from the leaf pattern on the DSP used on the card front.

Then I used some more of the blue cardstock to cut a smaller square, which was decorated with a die-cut leaf sprig and some gems. I popped this square up in the center of the aperture. 

A sentiment was stamped on some of the pale yellow/green cardstock, then cut out and matted with some blue cardstock. It was also popped up on the front of the card.





An additional sentiment was stamped on the inside, far enough below the blue square so that it didn't show when the card was closed.

You can just draw a pencil line on the inside across the bottom of the square aperture, and then stamp beneath that line. Once your stamping is done, just erase the line.

This is a fun card to make with an interesting end result. You can use any shape you want for the aperture, as long as you have some smaller dies of the same shape.

I love the way a frame is created when the layer on the inside is a different color than the card base and the DSP used on the front.

You could actually make a double frame if you first cut a larger aperture in the DSP before adhering it to the card front, and then cutting a smaller aperture. Had I done that, it would have resulted in a blue frame, then a yellow/green frame, and then the popped up blue square.

I hope you'll give it a try!

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Friday, October 30, 2026

A cozy-looking card...

 

My sister has an embossing folder that creates this knitted look with cardstock. Months ago--maybe even a year ago--she sent me some pieces of cardstock she had embossed for me. I've used one of them on this card.

I used some extra sticky, double-sided tape to adhere the knitted panel. I didn't want it to lift up around the edges.


I didn't start out to make a get well card, but when I saw the knitted texture, I decided it was perfect for helping someone feel warm, loved, and taken care of.

The burlap flower had been in my stash for a long, long time. I honestly was perplexed about how I could use it, but when I made this card, it seemed like the perfect embellishment. I die-cut the leaves to add just a bit of green and glued them in place.

The sentiment was stamped onto the lacy-edged rectangle. It had been die-cut with one of the dies in my stash that I don't use nearly enough.


I stamped a sentiment on the inside to finish the card.

I still have a few of these embossed panels left, so I think I'll make another get well card and maybe some baby cards with them. They've been a lot of fun to use.

THANKS AGAIN, SIS!

And thank you so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Wednesday, October 28, 2026

Son-in-law birthday card...

 

Our son-in-law had a birthday this month, and this is the card I made for him. I'm not sure which set of directions or tutorial I used, but click here to go to a similar tutorial with clear instructions and dimensions.


This photo shows the "card" adhered to the inside and the sentiment on the front of it.









Finally, this is the innermost sentiment. It was stamped on the inside of the inner "card."

This card is really fun to make, and my son-in-law remarked about its unique design. He seems to appreciate cards that are a bit different from the norm. 

I am finally done making Halloween cards and have moved on to Thanksgiving cards. I don't make nearly as many of them, so it won't take me long to finish them.

Do you make cards for Thanksgiving, or do you move from Halloween to Christmas?

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl


Monday, October 26, 2026

Balloon jack-o-lanterns...

 

Balloons for jack-o-lanterns is another idea I have used before. The difference this year is that I have a new set of balloon dies of different sizes.  I picked out three of the dies that would fit on an A2 card front. I cut them out from different shades of orange cardstock. I also cut out some black strings for the balloons.

The sentiment was stamped directly onto the DSP panel on the front of the card.


I pulled out my jack-o-lantern face stamps and selected one to fit on each balloon. 

The largest balloon was glued directly to the DSP and the other two balloons were popped up with foam tape.

The strings were glued to the DSP.







I cut an extra balloon for the inside and added it alongside the stamped sentiment.

If you have balloon dies, this is a quick and easy Halloween card to make. If you don't have the face stamps, they could be hand-drawn. I would suggest you draw them with a pencil first and then use a black, fine-point sharpie to fill them in. 

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl


Friday, October 23, 2026

Would you like a little scream with your coffee?...

 

I have used this sentiment (printed with my computer) on cards in previous years, but I love it, and it always gets a fun reception from others. They usually tell me that the sight of the spider on the cup makes them squeamish.


The die-cut spiderwebs are always a fun addition. The skull and crossbones on the cup came from another Halloween die-set. It's a little small for the cup, but still works okay, I think.

The cup and it's "steam" are popped up with foam tape and glue dots.







The sentiment on the inside is actually a rub-on. I have a few of them, and--when I can remember to do so--I use them on cards.

Do you have some favorite card designs and sentiments that you use year after year? I am able to donate these cards to the thrift store, so I don't worry about giving the same card design more than once to family members.

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl

Wednesday, October 21, 2026

Pocket card...

 

This card has a very simple design, but I think it will work well for someone who wants to give a cash or gift card treat to a loved one.


I created a cardbase with some striped cardstock. It came from an old Halloween paper stack with a couple of pages of cut-aparts. I used one of the cut-aparts for the focal point, matting it with some embossed orange cardstock and then popping it up with foam tape.







On the inside, I stamped a sentiment and then added a pocket beneath it with the striped cardstock.

I glued a thin piece of black cardstock across the top of the pocket and added a sentiment that had been stamped on a thin piece of orange cardstock.

This card was added to the "thrift store box," so I put a little note inside the pocket to let the purchaser of the card know they could insert a gift there.

I always give my teenage and young adult grandchildren money at Halloween so they can buy themselves a treat. I figured there are more grandmas out there like me!

Thanks so much for stopping by, and remember to laugh--a little or a lot--every day.

Cheryl